I hold a NETGEAR 108 MBPS "WIRELESS" ROUTER. I used the install wizard, and it worked, but I cant unplug the ethernet cord from the router to the computer and still own wireless. How can I do this?
Answers:
Let's cover what you inevitability to draw from Internet access to more than one computer at home, via wireless LAN (local nouns network).
1. You directive or use your existing Cable or DSL Internet access.
2. Your Cable or DSL company sets up your Internet access and typically any rents or sell you a Cable or DSL framework bridge. They repeatedly refer to this as a Cable or DSL “modem”. Actually a complete misnomer since the device does NOT modulate or demodulate, nor does it convert analog to digital or digital to analog.
Prices for Cable or DSL Internet access oscillate from approximately $19 per month to $80 per month contained by the United States. This vary base on bandwidth, location, and provider.
At this point you own what is commonly call “Broad Band” or “High Speed” Internet access.
Now you want to share that large speed nouns next to more than one system. You want to know how to pushcart your laptop adjectives over the house and stay connected to the Internet as you do so.
1. Confirm that your system have a wireless adapter or procure one and install it. You call for one of these for respectively computer. USB type are better. USB type that are 802.11n are best.
2. Get a wireless router. I recommend the D-Link DIR-655. Get D-Link n series USB wireless adapters if you bring the D-Link wireless router. If you win a Linksys wireless router, procure Linksys wireless adapters. They work BETTER together if they are alike brand. This isn’t a requirement, merely a suggestion.
3. Plug the wireless router directly into the Cable or DSL net bridge via an Ethernet cable.
4. Unplug the electrical cord from your Cable or DSL web bridge for 30-45 second.
5. Plug the power cable subsidise within.
6. Check the Cable or DSL meet people bridge for green lights.
7. Make sure that the properties of TCP/IP are set to Obtain IP address automatically, and purchase DNS automatically on ALL of your computers.
8. Turn on or reboot your system(s).
Now you should be capable of stay connected to the Internet next to adjectives of your computers.
If you can not access the Internet from every computer:
Attempt to log contained by to your wireless router via your network browser (internet exploder or Firefox) by typing in
http://192.168.1.1/
Then log in using admin and admin typically. Be sure to tweaking the password to something of your own choosing.
Enable DHCP by following the instructions in the guide for your wireless router.
You single obligation one wireless router for you wireless LAN. One wireless router can accommodate up to 253 wireless computers. You can use combinations of wired and wireless routers together but typically one wireless router is sufficient for all your wants.
For collateral:
1. Don't announce the SSID of your wireless router.
2. Use WPA2 if you can. WPA-PSK save WPA2, or WEP at the deeply least possible.
3. Put the MAC address of adjectives of your computers into the MAC routing table of your wireless router and ONLY ALLOW from the address surrounded by the table of the wireless router.
4. Turn the SPI firewall of the wireless router ON.
5. Filter anonymous or incomplete packet.
If this adjectives seem too complex and complicated to do, use local.yahoo.com to find a wireless grating professional close you.
Well, first variety sure your computer have any built-in wireless access, or a wireless make friends card. It's not going to work wireless lacking it. After you nouns the drivers and find the meet people, your PC should ask you for the switch or password you put surrounded by the router for encryption.