If I'm not mistaken adjectives 802.11b wireless networks transmit at 2.4 GHz, but you can enjoy two networks on different channel so they don't interfere next to respectively other. I be wondering what is the difference between frequency and focus within wireless network.
Answers:
Frequency method the span within which it works. For example, wifi works at 2.4 GHz. But within reality it works at different frequencies between 2.412 and 2.483 Ghz depending on the pipe you use. For US nearby are 11 channel, near most of the general public using ditch 6. Channels could overlap and this would create interference and connections problems.
For example, rut 1 uses 2.412 Ghz. Channel 2 uses 2.417 ghz and son on until 2.483 Ghz.
Hi nearby.
The number of cycles per section of time is call the frequency. For convenience, frequency is most commonly measured within cycles per second (cps) or the interchangeable Hertz (Hz) (60 cps = 60 Hz), name after the 19th C. physicist. 1000 Hz is habitually referred to as 1 kHz (kilohertz) or simply '1k' contained by studio parlance.
Current 2.4GHz (IEEE* 802.11b and 802.11g) and 5GHz (IEEE 802.11a) wireless systems use a single furrow to convey and receive information. Channel bonding allows the wireless system to use two channel at once. Using two channel improve the actions of the wireless nouns from a maximum speed of 54Mbps to a maximum of 600Mbps.
I hope that might support you, correct luck.
I believe that the bridge is of late the number assigned to a specific frequency for the equipment. When dealing beside the 2.4xx GHz frequency, they will swing the xx numbers to tweak the frequency a bit for better results. Check out the connect below, it may aid...
http://www.microsoft.com/athome/moredone...
hope this help