I bought a netgear wireless started router- i hold a bt home hub downstairs and needed the netgear router upstairs so i wud find a better connnection on xbox live, i enjoy the extension cable which runs upstairs, its confusing yep, but if i enjoy the home hub upstairs n downstairs it works bt the netgear router one and only works upstairs it cnt connect to the strip from upstairs for some strange root, so does anybody know how i cud draw from he hub and router working plz 10 points to the best annswer xxx
Answers:
Read this to setup the netgear router
You can't
Essentially what you are trying to do is to hold to routers create a broadband nouns on a single splash which is impractical.
You can association the netgear to the BT hub, OR you can use the netgear simply - but you can't use both at one and the same time.
It is close to trying to bring back two race to sit trailing the steering reins surrounded by a sports car and drive - unworkable.
My examine is: WHY would you use a hub to do anything? For that situation why use a router for Xbox live? Get a switch and toss the router and hub. Your press beg another query: What is it that you're trying to do? You utter bt home hub as if that explains what you hold downstairs.duh ...no. If you hold a wireless started?? router (I hold no clue what a started router is) after why are you running an extension cable? Is your DSL or cable modem wireless expert? Start again and state clearly what equipment you own, whether you enjoy DSL or cable, after state what you want the equipment to do. Then clearly state what you want the outcome to be. Technical question require clear accurate question ____cuz we be no become conscious u, duh.
While your description is confusing, your English composition skills, unacceptable Grammar, and miserable spelling make your writing extremely difficult to deduce. Please remember that when you ask others for serve, the smallest you can do is whip the application to provide details accuratly and to use the conventional English Grammar and Composition skills that are required of those writing at the fourth position stratum.
Having said this, I make sense of from your wording the following:
1. You hold a Netgear wireless router (there is no such piece as a started router so I do not know what you intended to vote using these words) and you aspiration to put this upstairs because it provides superior connectivity to your LAN devices over any other location contained by your home.
2. I do not know what a "bt home hub" is. I suspect you really mingy that you enjoy an ISP that provided a combination modem, router, and lattice switch (probably 4 port LAN) integrated into one box. You will to own this device downstairs. I presume this device provides LAN IP address via dynamic host configuration protocol (DHCP).
3. You want to know how to procure the two to work together so you can provide wireless connectivity from the Netgear device.
Assuming my comments above describe what you should hold stated initially, here is my answer:
1. You can do what you yearning to do.
2. You want to run a straight CAT5 cable from the modem / router / switch device's LAN port and plug it into the WAN port of the Netgear router.
3. You call for to configure the Netgear by connecting a wired CAT5 cable between your workstation and the Netgear LAN port. NEVER CONFIGURE ANY WIRELESS ROUTER OR WIRELESS ACCESS POINT VIA WIRELESS CONNECTION as you are expected to enjoy trouble.
4. Configure the Netgear WAN port for a dynamic IP (not static IP, not PPPoE) as the modem / router / switch will provide a dynamic IP nurture.
5. For the Netgear LAN port configuration, you can turn rotten DHCP and use the LAN IP address assigned by the modem / router / switch device within most cases. If this a moment ago will not work, you stipulation to form sure that you cash the Netgear LAN subnet to be at variance from the subnet provided by the modem / switch / router (e.g. if the modem / switch / router uses the 192.168.1.0/24 subnet you should use something else; I suggest 192.168.2.0/24. Note that 192.168.1.0/24 subnet technique the LAN IP address are within the format 192.168.1.x and subnet blanket is 255.255.255.0) You must not own the WAN IP of the Netgear be on like subnet as the LAN IP as this will create confusion and bomb of connectivity. Please file that any tuning contained by the Netgear router LAN subnet will require you to reboot the laptop connected to the Netgear router LAN and re-enter the configuration using the unknown subnet evasion gateway.
6. Once you are successful beside the router config you should know how to access the trellis beside the wired nouns.
7. After nouns beside the wired nouns, very soon address the wireless side. Access the Netgear using a wired nouns and set off wireless. BE SURE TO IMPLEMENT ALL SECURITY steps or you will be subject to hackers and freeloaders. Be sure to invoke encryption (WPA2 if the router supports it), use a strong preshare push button, and invoke MAC address validation as the router describes. Note and narrative guardedly what you configured as you will stipulation this when you configure your wireless LAN pcs and other devices.
You can't use 2 routers they pass conflicting information, and the home hub is a router. you should own bought a wirelss access point or list extender.