The ppl that come and set it up did not write down the WEP code and it wasnt on the framework, my laptop and the desktop within my room, weren't on the net, but thet loved ones PC that have it set up on and the router plugged into it works fine, I can not connect to the Internet on my laptop and 2nd desktop... It's really annoying, it took those guys to come out 4 months a moment ago to set up what took them adjectives of 10 minutes... I wasn't hear when they set it up, newly my mom, and she didnt write the code down... What can I do?
Answers:
for netgear you can try this.
Connect a laptop to the router (or desktop) whichever is closest via the cable (in ports 1-4).
Basically receive sure its connected through the concrete cable.
Then depart your internet explorer and type in to the pole
one of these:
192.168.1.1
192.168.1.2
192.168.2.1
Hit enter after typing one in, if it doesn't work try the subsequent until you see a LOGIN box appear.
For the login BOX you should enter "admin" for user label and "password" for password.
Note: The above username and pass is the evasion for netgear, if it does not work, that resources your web hired guys changed it.
Once you enjoy enter username and miss, you can click ok.
You will very soon be within the router settings.
Look for wireless, or wireless collateral, find the WEP (dont shift anything) and you should be capable of see the password surrounded by near. It will be encrypted approaching hjsbjhbdf. That is your WEP push button. It should look something resembling this image
http://www.ozcableguy.com/images/netgear...
Hope that works.
You are going to obligation to contact netgear and see if they can reset your WEP switch or if they hold it contained by their database. I don't estimate near is any other road really.
It is pretty straight forward.
the most major entity is attain out the little wan phamplet that come beside the wireless Router.
Chances are they used the exact same warranty set up as the failure to pay one mentioned on the Phamplet, if The Phamplet tell you how to silver the user dub and Password and it requies you RESET the Router to Factory Settings and afterwards lately follow the step by step within the phamplet.
Don
Go here
http://kbserver.netgear.com/kb_web_files...
Resetting the router isn't complicated. All the computers should be setup to use DHCP which the failure to pay unless you changed it.
In the router, when you see WEP, use a 10-digit knob i.e. a phone number that you can remember fairly than a passphrase.
The 64-bit WEP switch ends up as 10 hex digits, but the digits 0 to 9 are within the HEX span of 0 to F, so a number close to 5165551212 may look similar to a phone number for information on Long Island, but it is also a fine WEP knob.
Then whey you see the wireless framework on your laptpo, and connect to your wireless router, it will ask for a WEP switch and only just type contained by the 10 digit phone number you used for the WEP push button.
Also, amend the password to something you can remember, but at a minimum, revise it from the failure to pay setting.
Hope this help.
Jeff
